Description

PMSA® supplies a full range of premium quality production boards and pallets for the brick, block and paver making industry.

To achieve the lowest cost of operation the correct production board must be matched to your machine and the product type being produced, PMSA® can assist with this. PMSA® clients have seen up to 20% cement savings, faster vibration times and better quality finished concrete products when using the correct production boards matched to the production plant.

PMSA®’s full range of production boards and pallets:

  • PMSA®-FTC™ (fibre-reinforced, thermoplastic composite) production boards
  • MyWood solid wood production boards (kiln-dried solid wood: red pine, spruce or larch)
  • MyWood composite wood-plastic production boards (wood inner core with hardwearing plastic outer surface)
  • PMSA® steel production boards (solid or hollow core)
  • PMSA® Laminated production boards (birch wood with marine glue)

PMSA® supply premium quality production boards and pallets, as well as production board treatment equipment for all OEM machine types in the brick, block and paving products industry.

PMSA®, Pan Mixers®, Built to Last® and the PMSA® Company Logo are registered trade marks.

Features & Benefits

PMSA®-FTC™ Production Boards

  • High density, fibre-reinforced, thermoplastic composite production board allows for:
    • High vibration energy transmission giving higher density end-products
    • Cement savings
    • Reduced end-product rejects
    • Reduced production cycle times
    • High wear resistance resulting in longer life of the production board
    • Waterproof and rot resistant
  • Premium boards are surface ground for an even board thickness across each board and flat surface finish which is essential for all paver products where product height tolerance is minimal.
  • Flat and smooth finished board contributes to neatly formed end-products.
  • Reduced breakages and cracking of production boards due to high-impact resistance.
  • Due to solid construction the production board cannot delaminate.
  • Standard FTC™ production boards are ideal for a gantry product-handling system.
  • Optional corrosion resistant steel alloy C-profile, front and back, available for edge protection.
  • Optional corrosion resistant steel alloy C-profile is embedded during manufacture to increase rigidity and allow for low-flex on the FTC™ boards.
  • With imbedded optional corrosion resistant steel alloy C-profile, the FTC™ boards can be used in curing chambers.
  • New FTC™ production boards can be used immediately.
  • FTC™ Production boards are thinner than traditional wooden production boards.
  • PMSA® FTC™ boards are available for most OEM brick, block and paver making machines.

Production board treatment

  • No treatment required.

MyWood UPplus® Wood Production Boards

  • The wood is kiln dried for optimum moisture in the production board, ensuring it is correctly matched to the production environment.
  • Multiple dovetail joints ensure board strength and rigidity.
  • Knots drilled, plugged and glued to ensure defect-free surface.
  • Sanded surface for a flat, smooth finished board.
  • Treated surfaces ensure longevity.
  • Corrosion resistant galvanised C-profile for edge protection.
  • Corrosion resistant galvanised C-profile is secured with a single centre rivet and punched at ends, allowing the wood to move freely according to moisture conditions.
  • Extremely high load-bearing strength ideal for gantry or curing chambers.
  • New production boards can be used immediately.

Production board treatment

  • UPplus® is a biodegradable release agent that enables concrete products to be easily removed from the board.
  • UPplus® emulsion used at regular intervals enhances longevity of the board.
  • UPplus® prevents mould and fungus growth which increases the board life.

MyWood UPadvanced™ Wood-Plastic Composite Production Boards

  • Patented board with kiln-dried wooden core and hard-wearing plastic outer layer allows for:
    • Good vibration energy transmission giving higher density end-products.
    • Cement savings.
    • Reduced end-product rejects.
    • Reduced production cycle times.
    • High wear resistance resulting in longer life of the production board.
  • Jointless, flat and smooth finished board contributes to neatly formed end-products.
  • Increased board stiffness due to individually bonded planks (high load-bearing strength).
  • Waterproof bonding of individual planks contributes to increased board life.
  • Corrosion resistant galvanised C-profile for edge protection.
  • Production boards can be used for a gantry product handling system and curing chambers.
  • New production boards can be used immediately.
  • Production boards are available for most OEM brick, block and paver making machines.

Production board treatment

  • UPplus® is a biodegradable release agent enabling concrete products to be easily removed from the board.
  • UPplus® emulsion used at regular intervals enhances longevity.
  • UPplus® prevents mould and fungus growth which increases the board life.

PMSA® Steel Production Boards

  • Suitable for large and ultra-large capacity brick, block and paver making machines.
  • Durable and long lasting.
  • Recyclable at end of life.
  • Good end-product strength.
  • Good vibration transmission for high density end-products.

Production board treatment

  • Wire brush cleaning required to keep surface free of concrete.
  • Release agents required for easy removal of end-products from the board.

PMSA® Laminated Production Boards

  • Laminated kiln-dried wooden production boards allow for a cost effective solution.
  • Flat sanded finished board.
  • Increased board stiffness due to laminated construction.
  • Waterproof bonding with marine glue of individual layers contributes to increased board life.
  • Production boards can be used for a gantry product handling system and curing chambers.
  • New production boards can be used immediately.
  • Production boards are available for all OEM brick, block and paver making machines.

Production board treatment

  • Boards need to be regularly treated with a wax solvent-based solution.

PMSA®, Pan Mixers®, Built to Last ®, UpPlus® and the PMSA® Company Logo are registered trade marks

Downloads

Production Pallets and Treatment of Pallets Spec Sheet

Contact Us

Newsletter
This field is for validation purposes and should be left unchanged.